O Ring Seals
Hello every one last blog we will discuss about metal o ring internal & external pressure...!!
In this blog we discuss about O Ring Seals ...!!!
Sealing Concept :
The sealing performance of resilient Metal Seals is based on a the relative high specific c contact load at the sealing line and a certain resiliency or spring back of the elastic metal seal.
The seating load and the corresponding sealing line width, are a function of the selected seal type, cross section, material, material thickness and the alloy properties itself.
Depending on the required tightness and the media to be sealed, a specific c seating load will be required. Plating or coating with soft, ductile material will provide better sealing by filling up groove imperfections. The seating load will make the ductile layer to fl ow and fill up the groove surface irregularities.
Resilient Metal Seals require a controlled compression. Typically these seals are installed in a machined groove, or the compression is limited by a so called retainer plate.
Product Provide By HTMS FUTOM are :
1) Metal O Ring
2) Spring Energised Metal O Ring.
3) Metal C Ring.
4) Spring Energised Metal C Ring.
6) Metal Oysterseal.
7) Metal Commaseal.
8) O Ring Seals.
9) O Ring Seals Manufacturer.
 |
Seals |
Non-vented rings (OI & OE) are designed for lower pressure ranges. The perfectly closed O Ring design avoids ingress of the media into the seal. Moderate load, moderate pressure capability.
* Quality Of O Ring Seals :
• Computer controlled welding equipment.
• 100% LP test on O Ring seal welds.
• X-ray of weld area on request.
• Helium leak test equipment, with electronic data
logging.
• Seating load and spring back measurement
equipment.
• Heat treatment.
For detail information about O Ring Seals Please Visit This Link :
http://htmsfutom.com/metal-o-ring-manufacturer.php
Waiting For To Next Blog .....!!!!
